Dql-B02 Uav Detector Uav Detection Jamming Equipment

• Frequency Range: Interference Shielding
• Frequency: 420-460MHz 700-850MHz 850-940MHz-30W 900-1050MHz 1
• Application: Interference Shielding
• Total Transmit Power: 90~300W, Can Be Customized
• Interception Distance: Radius 0-100, 0-200, 0-300m Can Be Customized
• Fittings: Antennas, Power Cords, Chargers
• Model NO.: DQL-B02
• Specification: 46*43*30cm
• Origin: Shenzhen
• Production Capacity: 200

Product Description

 

 

1. performance index

Product parameters
Product model	DQL-B02
Product Name	High power drone interference control device and signal screen blocking device
Drone interference frequency band	satellite positioning	420-460MHZ 700-850MHz 850-940MHz-30W 900-1050MHz 1226-1251MHz 1555-1620MHz 2400-2500MHz 5150-5250MHz- 5725~5875MHz	Optional 3-8 signal channels
	Video, image transmission, remote control
Total transmission power	90-300W, customizable
Interception method	Automatically recognize and drive away drones, use them to stay away from restricted areas, and force drones to return, make an emergency landing, or hover and make an emergency landing; Otherwise, cut off all communication between the drone and the controller
Interception distance	Customizable radii of 0-100, 0-200, 0-300m
power supply	Fixed type: 220V ≤ 5A civilian power supply
	Built in high-capacity lithium battery: optional
Frequency band operation	Single or multiple frequency bands can be turned on or off at will
Heat dissipation	Built in heat sink, externally reinforced exhaust cooling and heat dissipation
structure	Handheld protective box, size: 46 * 43 * 30cm.
parts	Antenna, power cord, charger
Remarks	The above interference frequency bands can be customized

 

Number	project	distance	passageway	frequency	Transmission power	Total power	picture
one	DQL-B02-S361	Radius: 0-200	3-way	420-460MHZ-30W700-850MHz-30W850-940MHz-30W1555-1620MHz : 30W  2400 - 2500MHz :  30W  5725 - 5875MHz: 30W	180W	360W
two	DQL-B02-S362	Radius: 0-200	3-way	420-460MHZ-30W700-850MHz-30W850-940MHz-30W900-1050MHz-30W2400 ~ 2500MHz -30W  5725~5875MHz-30W	180W	360W
three	DQL-B02-S363	Radius: 0-300	4-way	420-460MHZ-50W700-850MHz-50W850-940MHz-50W1555-1620MHz-50W 2400-2500MHz-50W 5725-5875MHz -50W	300W	600W
four	DQL-B02-S364	Radius: 0-300	4-way	420-460MHZ-50W700-850MHz-50W850-940MHz-50W900-1050MHz-50W 2400-2500MHz-50W 5725-5875MHz -50W	300W	600W
five	DQL-B02-S381	Radius: 0-200	6 routes	420-460MHZ-30W 420-460MHZ-30W 700-850MHz-30W 700-850MHz-30W 850-940MHz-30W 850-940MHz-30W 900-1050MHz-30W 900-1050MHz-30W	240W	500W
six	DQL-B02-S382	Radius: 0-200	6 routes	420-460MHZ-30W700-850MHz-30W850-940MHz-30W900-1050MHz- 30W1226~ 1251MHz-30W2400-2500MHz : 30W  5150-5250MHz-30W5725- 5875MHz: 30W	240W	500W

•  

Equipment Configuration Table
Number	Device Name	quantity	unit	Remarks
one	main engine	one	platform
two	antenna	one	set
three	Power cord	one	root
four	charger	one	individual
five	User manual	one	share	Electronic file

Equipment installation (see Figure 4) 


(Figure 4)

Equipment installation instructions

1. Connect the host and antenna according to Figure 4, and the host port and antenna port must correspond one by one, otherwise it will affect the signal transmission distance.

2. Choose external battery power or external AC power according to application requirements. If using external AC power supply, please connect the external AC power cord. If using an external battery for power supply (DC), please select the corresponding connection cable to connect the external battery to the device. 

3. The RF cable connecting the host and antenna must be tightened, otherwise ignition may occur.

• Usage

Usage

1. DQL-BO2 equipment should be placed in a well ventilated location, avoiding large objects as much as possible to ensure shielding effectiveness. 

2. Please confirm again whether the antenna and power cord are connected correctly before use.

3. After the antenna is correctly connected to the power cord, the main power switch can be directly turned on. Rotate the main switch to the AC position when using an external AC power supply; Rotate the main switch to the DC position when using an external battery for power supply. Turn the main switch to the OFF position when turning off the device. 

4. After the main power is turned on, the modules can be independently switched on and off according to application requirements.

5. If it is necessary to increase the interference distance of the device, the antenna height can be raised. The interference distance of the equipment also depends on the application site. If the distance between the equipment and the base station is long, the interference distance is long, and vice versa, it is close.