Power Supply: | External Lithium Battery: 27V/5000mAh |
---|---|
Endurance: | 1 Hour |
Operation Mode: | One-Hand or Two-Hand Operation. |
Cooling Method: | Radiator Fin |
Intercepting Method: | Forced Return, Expulsion, Forced Landing, Hovering |
Intercepting Channel: | 3-4 Channels |
Suppliers with verified business licenses
Model No. | Power level | Configure antenna | forced landing | forced landing | forcible removal | disperse; expel | Warning and driving away |
DQL-Y02-4 | 1.5G-10W 2.4G-10W*2 5.8G-10W |
Built-in antenna (30 degrees) | 200 meters | 400 meters | 600 meters | 800 meters | 1200 meters |
Indicate | The above distance is based on the DJI Phantom 3 drone as a reference |
Product parameters | |||
1 | Product name | Non-gun UAV control equipment | |
2 | Product model | DQL-Y02 | |
3 | Host size | 566mm long, 98mm wide, 52mm thick | |
4 | Power supply | External lithium battery: 27V/5000mAh | |
5 | endurance | It can work for up to 1 hour with an external charger. | |
6 | Operation mode | One-hand or two-hand operation. | |
7 | Cooling method | radiator fin | |
8 | Intercepting Method | Forced return, expulsion, forced landing, hovering landing | |
9 | intercepting channel | 3-4 channels | |
10 | frequency allocation | 3-channel 4-way | |
11 | a switch | 2: Launch key, mode key: return key, forced landing key | |
12 | Support frequency band | GPS positioning | 1560-1620MHz |
13 | Remote control/image transmission | 900M: 840-930MHz 2400MHz-2500MHz, 2400MHz-2500MHz (differential) 5725MHz-5850MHz |
|
14 | working power | 110-140W | |
15 | RF power | Single channel transmit power 15-20W | |
16 | Antenna | built-in antenna | |
17 | Energy display | Voltage display | |
18 | control distance | Open ground ≥1200 meters (DJI Phantom 3 drone test). | |
19 | a switch | Industrial switch, with a service life of more than 100,000 times | |
20 | Weight: | About 1.6kg (bare machine) | |
21 | packaging weight | 15.4kg | |
22 | Customize | Customizable |
Equipment configuration table | ||||
Serial number | Equipment name | quantity | Unit: | Remarks |
1 | Host machine | 1 | Taiwan | |
2 | Power charger | 1 | One. | |
3 | mobile battery | 1 | One. | |
4 | Protective aluminum box | 1 | individuals | |
5 | User's Manual | 1 | share of | electronic file |
6 | battery shoulder bag | 1 | individuals | Send it |
Easy to operate and convenient to use | |
Step by step | 1.When using, first turn on the battery power switch, check the voltmeter, and confirm that the power is sufficient (when the power is too low, 24.6V, it will affect the control effect of the drone). 2.Connect the battery to the jamming "gun" with a power cord, and select the jamming mode "repulsion" or "forced landing" 3. Pick up the device "gun" and aim it roughly at the drone, press the "launch button" to develop and launch the jamming signal. The reaction time of the drone to interference is about 5 seconds. The interference signal needs to be continuously launched at the drone until it is forced to land or driven away. |
Maintenance and service | Charging: After each use, charge it with a matching charger until the voltmeter shows 100% full. Save: When placing, please place the device in the protective box provided to avoid squeezing the device. After each use, please turn off all switches (lights off, display screen turned off). Waterproof and collision-proof: The device is not waterproof. During use or storage, do not allow liquids to seep into the device. If you find any liquid seeping in, do not turn it on and contact the after-sales service for guidance on maintenance (to avoid burning the device). If collision is unavoidable during use, resulting in equipment damage or abnormal noise, please contact the after-sales service for repair before use. |
Power on | Select the interference mode switch, press the transmit button switch (light on) to start transmitting the corresponding frequency interference signal
|
Power off | Turn off the launch switch (the light goes out) and unplug the power cord. |
Warranty and Disclaimer | |
1 | If it is not damaged by human factors within three months, it is guaranteed to be repaired and replaced, and returns are not supported. |
2 | Due to the particularity of radio frequency products and their high susceptibility to environmental factors, we only guarantee the technical parameters of the product: frequency, frequency band, and power meet requirements, as well as the effectiveness of tested sites and models. We do not guarantee the effectiveness of any other untested environments or models. |
3 | Product pictures are for reference only, please refer to the actual product. (This product varies greatly depending on the environment used by different customers, with different configurations, and there may be corresponding differences in product form or labeling.) |
4 | When using radio equipment, please comply with relevant national and local laws and regulations; therefore, those who violate relevant laws and regulations shall bear the consequences. |
project | Troubleshooting methods |
The jamming distance becomes closer | Turn on the voltmeter switch to check the battery power and voltage. If the battery voltage is less than 24V, the module power supply is insufficient, and the interference distance becomes closer. Use it after fully charging |
It can't interfere with the drone | Turn on the voltmeter switch to check the battery power and voltage. If the battery voltage is less than 22V, the module cannot work and should be charged in time. Use it when it is fully charged |
It can't be charged | When the battery cannot be charged, first check whether the charger is connected to 220V AC power, whether the green light of the electrical appliance is on, and then check whether the charging port is properly inserted. |
Suppliers with verified business licenses